Studer Innotec

btn-menu

Land applications

A simple on-board energy system is often necessary to power AC voltage appliances, while a vehicle is away from the electrical grid (garage, camping...). In this case, the energy is stored in the battery, which is actually charged by power sources on-board, such as a genset, solar generator, wind turbine, alternator or a combination of these. Studer Innotec offers the product range that secures the management and conversion of this energy, while securing an optimal power supply to the on-board appliances.

AC power on-board with inverter/charger Xtender

The inverter/charger charges the battery from the grid or from a genset, and powers any kind of electrical appliance. It converts the battery DC voltage to AC voltage. The models equipped with the Smart-Boost system enable the addition of the ...

Variable power source assistance

The source being a variable power alternator, the Smart-boost will supply the power difference in order that the power delivered is always the same (Application note AN004/www.studer-innotec.com).

An upgradeable power

Power available to the users can be adapted in the course of time by adding inverters in parallel or by creating additional phases. Therefore, it is therefore possible to install up to 9 inverters in a 3-phase power system.

AC power on-board with inverter/charger Compact

The inverter/charger charges the battery from the grid or from a genset, and powers any kind of electrical appliance. It converts the battery DC voltage to AC voltage. The models equipped with the Smart-Boost system enable the addition of the ...